Hyundai Veloster: Seat Belt Buckle Switch (BS). Components and Components Location

Seat Belt Buckle Switch (BS). Description and Operation

Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status ...

Seat Belt Buckle Switch (BS). Repair procedures

Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front seat asse ...

See also:

Tire maintenance
In addition to proper inflation, correct wheel alignment helps to decrease tire wear. If you find a tire is worn unevenly, have your dealer check the wheel alignment. When you have new tires instal ...

Wipers and washers
A :Wiper speed control (front) · 2 – High wiper speed · 1 – Low wiper speed · --- – Intermittent wipe · AUTO* – Automatic control wipe · O – Off · – Single wipe B : Intermitte ...

Tire rotation
To equalize tread wear, it is recommended that the tires be rotated every 7,500 miles (12,000 km) or sooner if irregular wear develops. During rotation, check the tires for correct balance. When r ...