Hyundai Veloster Manuals

Hyundai Veloster: Rear Torsion Beam Axle. Components and Components Location - Rear Suspension System - Suspension SystemHyundai Veloster: Rear Torsion Beam Axle. Components and Components Location

Hyundai Veloster 2011-2017 Service Manual / Suspension System / Rear Suspension System / Rear Torsion Beam Axle. Components and Components Location

Components

1. Rear torsion beam axle


Rear Coil Spring. Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Rear Torsion Beam Axle. Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

See also:

SRS Control Module (SRSCM). Description and Operation
Description The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to discriminate between an event that warrants restraint system deployment and an event that d ...

Camshaft Position Sensor (CMPS). Description and Operation
Description Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element. It is related with Crankshaft Position Sensor (CKPS) and detects the ...

Resetting the sunroof
Whenever the vehicle battery is disconnected or discharged, you must reset your sunroof system as follows: 1. Turn the ignition switch to the ON position. 2. Close the sunroof. 3. Release the sun ...

Categories


В© 2011-2025 Copyright www.hvmanual.com