Hyundai Veloster: Battery replacement
First generation (2011–present) / Hyundai Veloster 2010-2018 Owner's Manual / Features of your vehicle / Smart key / Battery replacement
A smart key battery should last for several years, but if the smart key is not working properly, try replacing the battery with a new one. If you are unsure how to use your smart key or replace the battery, contact an authorized HYUNDAI dealer.
✽ NOTICE
The circuit inside the smart key can have a problem if exposed to moisture or static electricity. If you are unsure how to use your smart key or replace the battery, contact an authorized HYUNDAI dealer.
1. Pry open the rear cover of the smart key.
2. Replace the battery with a
new battery (CR2032). When replacing the battery, make sure the battery positive
“+” symbol faces up as indicated in the illustration.
3. Install the battery in
the reverse order of removal.
CAUTION
- • The smart key is designed to give you years of trouble-free use, however it can malfunction if exposed to moisture or static electricity. If you are unsure how to use or replace the battery, contact an authorized HYUNDAI dealer.
- • Using the wrong battery can cause the smart key to malfunction. Be sure to use the correct battery.
- • To avoid damaging the smart key, don't drop it, get it wet, or expose it to heat or sunlight.
WARNING
An inappropriately
disposed battery can be harmful to the environment and human health.
Dispose the battery according to your local law(s) or regulation.
Immobilizer system
Your vehicle is equipped with an electronic engine immobilizer system to reduce
the risk of unauthorized vehicle use.
Your immobilizer system is comprised of a small transponder in the smart key
...
See also:
Adding equipment to or modifying your air bag-equipped vehicle
If you modify your vehicle by changing your vehicle's frame, bumper system, front
end or side sheet metal or ride height, this may affect the operation of your vehicle's
air bag system. ...
Clutch Pedal. Components and Components Location
Components
1. Reverse hose
2. Master cylinder
3. Ignition lock switch
4. Clutch switch
5. Clutch arm assembly
6. Pedal pad
...
Closing the fuel filler lid
1. To install the cap, turn it clockwise until it “click” one time. This indicates
that the cap is securely tightened. 2. Close the fuel filler lid and push it in
lightly making sure that it is se ...