Inspection
Wiper Switch
Washer Switch
Removal
1. |
Remove the steering column upper and lower shrouds (A) after removing
3 screws.
|
2. |
Disconnect the connector(A).
|
3. |
If necessary of removing the wiper & washer switch (A), release
the lock of wiper switch using tool without removing the steering wheel
and the clock spring.
|
4. |
Remove the steering wheel.
(Refer to the ST group - "Steering column and shaft")
|
5. |
Remove the clock spring.
(Refer to the RT group - "Airbag module")
|
6. |
Remove the multifunction switch assembly(A) with 2 screws.
|
Installation
1. |
Install the multifunction switch after connecting the connector.
|
2. |
Install the clock spring and steering.
|
3. |
Install the upper and lower shroud.
|
4. |
Install the steering wheel.
|
Side Airbag (SAB) Module. Components and Components Location
Components
...
Opening the hood
1.Pull the release lever to unlatch the hood. The hood should pop open slightly.
WARNING
Open the hood after turning off the engine on a flat surface, shifting the
shift lever to the P(Park) pos ...
Repair procedures
Removal and Installation
1.
Remove the battery.
(1)
Disconnect the battery terminals (A).
Tightening ...