Hyundai Veloster: Wheel. Repair procedures
Hyundai Veloster 2011-2017 Service Manual / Suspension System / Tires/Wheels / Wheel. Repair procedures
Hub Nut Tightening Sequence
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
|
When using an impact gun, final tightening torque should be checked
using a torque wrench.
|
Wheel Runout
| 1. |
Jack up the vehicle and support it with jack stands.
|
| 2. |
Measure the wheel runout with a dial indicator as illustated.
|
| 3. |
Replace the wheel if the wheel runout exceeds the limit.
|
Alignment. Repair procedures
Front Wheel Alignment
• When using a commercially available computerized wheel alignment
equipment to inspect the front whee ...
Tire. Repair procedures
•
Using tires and wheel other than the recommended sizes
could cause unusual handling charact ...
See also:
Yaw-rate and Lateral G Sensor. Description and Operation
Description
When the vehicle is turning with respect to a vertical axis the yaw rate
sensor detects the yaw rate electronically by the vibration change of plate
fork inside the yaw rate sens ...
High beam operation
To turn on the high beam headlights, push the lever away from you. Pull it back
for low beams.
The high beam indicator will light when the headlight high beams are switched
on.
To prevent the ...
Reporting safety defects
If you believe that your vehicle has a defect which could cause a crash or could
cause injury or death, you should immediately inform the National Highway Traffic
Safety Administration (NHTSA) in ...
Categories
- Hyundai Veloster Manuals Home
- Hyundai Veloster 2010-2017 Owner's Manual
- Hyundai Veloster 2010-2017 Service Manual
