Hyundai Veloster: Vehicle break-in process
Hyundai Veloster 2011-2017 Owner's Manual / Introduction / Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for the first 600 miles (1,000 km) you may add to the performance, economy and life of your vehicle.
- Do not race the engine.
- While driving, keep your engine speed (rpm, or revolutions per minute) between 2,000 rpm and 4,000 rpm.
- Do not maintain a single speed for long periods of time, either fast or slow. Varying engine speed is needed to properly break-in the engine.
- Avoid hard stops, except in emergencies, to allow the brakes to seat properly.
- Do not let the engine idle longer than 3 minutes at one time.
Fuel requirements
Your new vehicle is designed to use only unleaded fuel having a pump octane number
((R+M)/2) of 87 (Research Octane Number 91) or higher.
Your new vehicle is designed to obtain maximum performance ...
Vehicle data collection and event data recorders
This vehicle is equipped with an event data recorder (EDR). The main purpose
of an EDR is to record, in certain crash or near crash-like situations, such as
an air bag deployment or hitting a road ...
See also:
Closing the fuel filler lid
1. To install the cap, turn it clockwise until it “click” one time. This indicates
that the cap is securely tightened. 2. Close the fuel filler lid and push it in
lightly making sure that it i ...
Troubleshooting
Troubleshooting
Ignition System
Symptom
Suspect area
Remedy
Engine will not start or is hard to start (Cranks OK)
Ignition lock switch ...
Blade inspection
✽ NOTICE Commercial hot waxes applied by automatic car washes have been known
to make the windshield difficult to clean.
Contamination of either the windshield or the wiper blades with for ...
Categories
- Hyundai Veloster Manuals Home
- Hyundai Veloster 2010-2017 Owner's Manual
- Hyundai Veloster 2010-2017 Service Manual
