Inspection
1. |
Turn the ignition switch OFF.
|
2. |
Disconnect the VIS valve connector.
|
3. |
Measure resistance between VIS valve terminals 1 and 2.
|
Removal
1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Disconnect the variable intake solenoid valve connector (A).
|
3. |
Disconnect the vacuum hoses (B) from the valve.
|
4. |
Remove the installation bolt, and then remove the valve (C) from
the surge tank.
|
Installation
|
|
1. |
Installation is reverse of removal.
|
Scheduled maintenance service
Follow Normal Maintenance Schedule if the vehicle is usually operated where none
of the following conditions apply. If any of the following conditions apply, follow
Maintenance Under Severe Usage ...
Front Seat. Repair procedures
Replacement
Front Seat Assembly Replacement
1.
Remove the front foot cover.
2.
After loosening the front seat assembly mounting
bolts, ...
Specifications
Specifications
Fuel Delivery System
Items
Specification
Fuel Tank
Capacity
50 lit. (13.2 U.S.gal., 52.8 U.S.qt., 43.9 Imp ...