Hyundai Veloster Manuals

Hyundai Veloster: Troubleshooting - General Information - Emission Control SystemHyundai Veloster: Troubleshooting

Troubleshooting

Symptom
Suspect area
Engine will not start or struggle to start
Vapor hose damaged or disconnected
Engine struggles to start
Malfunction of the Purge Control Solenoid Valve
Rough idle or engine stalls
Vapor hose damaged or disconnected
Malfunction of the PCV valve
Rough idle
Malfunction of the Evaporative Emission Control System
Excessive oil consumption
Positive crankcase ventilation line clogged


Specifications
Specifications Purge Control Solenoid Valve (PCSV) ▷ Specification Item Specification Coil Resistance (Ω) 22.0 ~ 26.0 [20В°C( ...

Schematic Diagrams
Schematic Diagram ...

See also:

Interior Trim. Components and Components Location
Components [RH] 1. Front pillar trim 2. Center pillar lower trim 3. Center pillar upper trim 4. Rear pillar trim 5. Cowl side trim 6. Front door ...

Front Wheel Speed Sensor. Repair procedures
Removal 1. Remove the front wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

General Information
General Troubleshooting Information Before Troubleshooting 1. Check applicable fuses in the appropriate fuse/relay box. 2. Check the batter ...

Categories


В© 2011-2024 Copyright www.hvmanual.com