Hyundai Veloster Manuals

Hyundai Veloster: Towing service - Towing - What to do in an emergencyHyundai Veloster: Towing service

If emergency towing is necessary, we recommend having it done by an authorized

If emergency towing is necessary, we recommend having it done by an authorized Hyundai dealer or a commercial tow-truck service. Proper lifting and towing procedures are necessary to prevent damage to the vehicle. The use of wheel dollies or flatbed is recommended.

It is acceptable to tow the vehicle with the rear wheels on the ground (without dollies) and the front wheels off the ground.

If any of the loaded wheels or suspension components are damaged or the vehicle is being towed with the front wheels on the ground, use a towing dolly under the front wheels.

When being towed by a commercial tow truck and wheel dollies are not used, the front of the vehicle should always be lifted, not the rear.

CAUTION

CAUTION

When towing your vehicle in an emergency without wheel dollies :

1. Set the ignition switch in the ACC position.
2. Place the shift lever in N (Neutral).
3. Release the parking brake.

CAUTION

Failure to place the transaxle shift lever in N (Neutral) may cause internal damage to the transaxle.

Towing
...

Removable towing hook
1. Open the tailgate, and remove the towing hook from the tool case. 2. Remove the hole cover pressing the lower part of the cover on the bumper. 3. Install the towing hook by turning it clockwi ...

See also:

Concentric Slave Cylinder Assembly. Components and Components Location
Component 1. Concentric slave cylinder assembly 2. Manual transaxle ...

Troubleshooting
System self diagnosis Possible to detect abnormal situations from Sensor data • High Temperature – Sensor's temperature is more than 100 °C • ...

Input Speed Sensor 2 > Repair procedures
Inspection Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor. Removal 1. Remove the under cover. 2. Disconnect the inp ...

Categories


© 2011-2024 Copyright www.hvmanual.com