Hyundai Veloster Manuals

Hyundai Veloster: Technical Data - If you have a flat tire (with tire mobility kit) - What to do in an emergencyHyundai Veloster: Technical Data

System voltage: DC 12 V
Working voltage: DC 10 - 15 V
Amperage rating: max. 15 A
Suitable for use at temperatures: -22 ~ +158°F (-30 ~ +70°C)
Max. working pressure: 6 bar (87 psi)
Size
Compressor: 6.7 x 5.9 x 2.4 in. (170 x 150 x 60 mm)
Sealant bottle: 3.3 x 3.0 ø in. (85 x 77 ø mm)
Compressor weight: 1.8 lbs (0.8 kg)
Sealant volume: 12.2 cu. in. (200 ml)

WARNING

It is important to replace the sealant compound bottle after it is used in case of another tire emergency. Sealing compound and spare parts can be obtained and replaced at an authorized vehicle or tire dealer. And, empty sealing compound bottles, liquid residue from the sealing compound should be disposed of at an authorized HYUNDAI dealer or in accordance with local waste disposal regulations for safe disposal.

Setting the tire inflation pressure
12. After driving approximately 2 miles (3 km), stop at a suitable location. 13. Connect connection hose (9) of the compressor directly to the tire valve. 14. Connect between compressor and the ve ...

Towing
...

See also:

Rail Pressure Sensor (RPS). Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ...

Rear Components and Components Location
Components-1 1. Rear bumper cover 2. Tail trim lower cover 3. Rear bumper side bracket [RH] 4. Rear bumper side bracket [LH] Components-2 (T-GDI) ...

Input Speed Sensor 1 > Repair procedures
Inspection Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor. Removal 1. Remove the under cover. 2. Disconnect the inp ...

Categories

© 2011-2026 Copyright www.hvmanual.com