Hyundai Veloster: Steering Angle Sensor. Description and Operation

The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line.

The SAS is used to determine turning direction and speed of the steering wheel.

The HECU uses the signals from the SAS when performing ESC-related calculations.

Components (Steering Angle Sensor, Torque Sensor, Failsafe relay, etc.) of the EPS system are located inside the steering column & EPS unit assembly and the steering column. EPS unit assembly must not be disassemble to be inspected. They must be replaced. (Refer to “ST (Steering system) Gr.”)

ESC OFF Switch. Repair procedures

Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. (Refer ...

Body (Interior and Exterior)

...

See also:

Low tire pressure telltale
When the tire pressure monitoring system warning indicator is illuminated, one or more of your tires is significantly under-inflated. If the telltale illuminates, immediately reduce your speed, a ...

Capacity/weight
M/T : Manual transaxle A/T : Automatic transaxle DCT : Double clutch transmission ...

Description and Operation
Description System Overview The System offers the following features: - Human machine interface through a 1-stage button, for terminal switching and engine start. ...