Hyundai Veloster: Specifications
Hyundai Veloster 2011-2017 Service Manual / Body Electrical System / Multifunction switch / Specifications
Hyundai Veloster 2011-2017 Service Manual / Body Electrical System / Multifunction switch / Specifications
Specifications
|
Items |
Specifications |
|
|
Rated voltage |
DC 12V |
|
|
Operating temperature range |
-30°C ~ +80°C (-22 ~ +176°F) |
|
|
Rated load |
Dimmer & passing switch |
High : 1.0A (Relay load) Low : 1.0A (Relay load) Passing : 1.0A (Relay load) |
|
Lighting switch |
Lighting : 1.0A (Relay load) |
|
|
Turn signal & lane change switch |
6.6 ± 0.5A (Lamp load) |
|
|
Fog lamp switch(Front & Rear) |
1.0A (Relay load) |
|
|
Wiper & mist switch |
Low, High : 4.0A (Motor load) Intermittent : 0.22 ± 0.05A (Relay load) Lock : Max. 28A (Motor load) Mist : 4.0A (Motor load) |
|
|
Washer switch(Front & Rear) |
4A (Motor load) |
|
|
Rear Wiper |
0.2A (Relay load) |
|
Components and Components Location
Components(1)
Connector name
No
Descripton
Connector name
No
RH SIDE
Lighting
(13 pin)
-LH side
...
See also:
Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the
turn signals, move the lever up or down (A). Green arrow indicators on the instrument
panel indicate which turn si ...
Removing and storing the spare tire
Turn the tire hold-down wing bolt counterclockwise.
Store the tire in the reverse order of removal.
To prevent the spare tire and tools from “rattling” while the vehicle is in motion,
store ...
General Safety Information and Caution
Precautions
General Precautions
Please read the following precautions carefully before performing the
airbag system service.
Observe the instructions described in this manual, ...
Categories
© 2011-2025 Copyright www.hvmanual.com