Hyundai Veloster Manuals

Hyundai Veloster: Specifications - General Information - Engine Electrical SystemHyundai Veloster: Specifications

Hyundai Veloster 2011-2017 Service Manual / Engine Electrical System / General Information / Specifications

Specifications

Ignition System

Items
 Specification
Ignition coil
 Primary resistance
 0.75 ± 15% (Ω)
Secondary resistance
 5.9 (kΩ)
Spark plugs
 Type
 SILZKR6B10
Gap
 0.9 ~ 1.0 mm ( 0.0433 ~ 0.0394 in.)

Starting System

Items
 Specification
Starter
 Rated voltage
 12 V, 0.9kW
No. of pinion teeth
 8
No-load characteristics
 Voltage
 11.5V
Ampere
 60A, MAX
Speed
 5,500rpm, MIN

Charging System

Items
 Specifications
Alternator
(AMS)
 Rate voltage
 13.5V, 90A
Speed in use
 1,000 ~ 18,000 rpm
Voltage regulator
 IC regulator built-in type
Regulator setting voltage
 External mode
 ECU control
Internal mode
 14.55 ± 0.3V
Temperature compensation
 External mode
 ECU control
Internal mode
  -3.5 ± 2mV / °C
Battery
 Type
 36-20GL
Cold cranking amperage [at -18°C(-0.4°F)]
 410 A
Reserve capacity
 80 min
Specific gravity [at 25°C(77°F)]
 1.280 ± 0.01

•
COLD CRANKING AMPERAGE is the amperage a battery can deliver for 30 seconds and maintain a terminal voltage of 7.2V or greater at a specified temperature.
•
RESERVE CAPACITY RATING is amount of time a battery can deliver 25A and maintain a minimum terminal voltage of 10.5V at 26.7°C(80.1°F).


General Information
...

Troubleshooting
Troubleshooting Ignition System Symptom Suspect area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch ...

See also:

Rocking the vehicle
If it is necessary to rock the vehicle to free it from snow, sand, or mud, first turn the steering wheel right and left to clear the area around your front wheels. Then, shift back and forth betwe ...

Battery Caution Label Description
Warning / Caution Label (Cont'd) A. Keep lighted cigarettes and all other flames or sparks away from the battery. B. Wear eye protection whe ...

Manifold Absolute Pressure Sensor (MAPS). Description and Operation
Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog ...

Categories


© 2011-2024 Copyright www.hvmanual.com