Smart Key
1. |
Connect the DLC cable of GDS to the data link connector in driver
side crash pad lower panel, turn the power on GDS.
|
2. |
Select the vehicle model and then do "Smart key code saving".
|
3. |
After selecting "Smart key teaching" menu, push "Enter" key, then
the screen will be shown as below.
|
4. |
After pushing the SSB with the teaching key, press "OK" button.
|
5. |
Input the "Pin code" for first key teaching.
|
6. |
Confirm the message "First key teaching completed".
|
7. |
Confirm the message "Second key teaching completed".
|
8. |
Then the screen will be shown as below when key teaching process
is completed.
|
Interior Trim. Repair procedures
Replacement
Door Scuff Trim Replacement
•
Put on gloves to protect your hands.
...
Mic. Repair procedures
Inspection
1.
Disconnect the negative(-) battery terminal.
2.
Remove the roof trim.
(Refer to the BD group - "Roof trim")
...
Gear Actuator > Components and Components Location
Component Location
1. Gear actuator
2. DCT(Dual Clutch Transmission)
...