Removal
1. |
Remove the floor console assembly.
(Refer to the Interior (Console) of BD Group.)
|
2. |
Disconnect the sports mode connector (A).
|
3. |
Remove the control cable (A).
|
4. |
Remove the bolt and then the shift lever assembly (A).
|
Installation
1. |
Installation is the reverse of removal.
|
Changing the Shift Cable
1. |
Remove the floor console assembly.
(Refer to the Interior (Console) of BD Group.)
|
2. |
Remove the control cable (A).
|
3. |
Remove the retainer (A) and nut (B).
|
4. |
Remove the cable (B) from the cable bracket (A) on the A/T.
|
5. |
Remove the nut (C) from the manual control lever.
|
6. |
Remove the shift cable by pulling it toward the interior.
|
7. |
Installation is the reverse of removal.
|
Adjustment
Adjusting the Control Cable |
1. |
Place the shift lever in the interior, and the transmission manual
control lever, to the N position.
|
2. |
Connect the shift lever (A) in the interior with the control cable
(B).
|
3. |
Lightly push the shift cable towards F to tighten the cable.
|
4. |
Tighten the nut (A) to the specified torque.
|
Hazard Lamp Switch. Repair procedures
Inspection
1.
The GDS will be able to diagnose defects of hazard switch quickly.
The GDS can operates actuator manually, input/output value monitoring
and self diagno ...
Impact sensing door unlock system
All doors will be automatically unlocked when the impact is delivered to impact
sensors while the ignition switch is ON. However, the doors may not be unlocked
if mechanical problems occur with th ...
Purge Control Solenoid Valve (PCSV). Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between th ...