Hyundai Veloster Manuals

Hyundai Veloster: Shelf disassembly and installment - Tailgate - Features of your vehicleHyundai Veloster: Shelf disassembly and installment

1. Disassemble the wires(1) connected to left and right fixed hook. 2. Push

1. Disassemble the wires(1) connected to left and right fixed hook.
2. Push the shelf(2) up and disassemble the shelf.
3. To install the shelf, push the shelf down at original position and fix the wire to position(1)

CAUTION

When you close the tailgate, check the shelf position. Be careful not to collide the shelf and tailgate. If not, the shelf may be damaged.

Emergency tailgate safety release
Your vehicle is equipped with the emergency tailgate safety release located on the bottom of the tailgate. When someone is inadvertently locked in the luggage compartment, the tailgate can be op ...

Closing the trunk
To close the trunk, lower the trunk lid, then press down on it until it locks. To be sure the trunk lid is securely fastened, always check by trying to pull it up again. WARNING The trunk lid sh ...

See also:

Maintenance under severe usage conditions
The following items must be serviced more frequently on cars normally used under severe driving conditions. Refer to the chart below for the appropriate maintenance intervals. R : Replace I : In ...

Components and Components Location
Component Location (1) 1. Buzzer 2. Smart key unit 3. Interior antenna 1 4. Interior antenna 2 5. Trunk antenna 6. Bumper antenna Component Locat ...

Components and Components Location
Components ...

Categories


В© 2011-2024 Copyright www.hvmanual.com