Hyundai Veloster: Seat Belt Buckle Switch (BS). Description and Operation

The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ground for the signal return. The buckle status shall modify the SRSCM deployment. If the buckle status is unbuckled, the corresponding pretensioner will not be deactivated.

Side Impact Sensor (SIS). Repair procedures

Removal Pressure Side Impact Sensor • Removal of the airbag must be performed accordin ...

Seat Belt Buckle Switch (BS). Components and Components Location

Components ...

See also:

Description and Operation
Description Exhaust emissions (CO, HC, NOx) are controlled by a combination of engine modifications and the addition of special control components. Modifications to the combustion chamber, ...

Repair procedures
Inspection Front Door Lock Actuator Inspection 1. Remove the front door trim. (Refer to the BD group - "Front door") 2. R ...

Manifold Absolute Pressure Sensor (MAPS). Troubleshooting
Signal Waveform ...