Component Replacement After Deployment
Before doing any SRS repairs, use the GDS to check for DTCs. Refer
to the Diagnostic Trouble Code list for repairing of the related DTCs.
|
- |
SRSCM
|
- |
Deployed airbag(s)
|
- |
Seat belt pretensioner(s)
|
- |
Front impact sensor
|
- |
SRS wiring harnesses
|
- |
Inspect the clock spring for heat damage.
If any damage found, replace the clock spring.
|
- |
SRSCM
|
- |
Deployed airbag(s)
|
- |
Side impact sensor(s) for the deployed side(s)
|
- |
SRS wiring harnesses
|
- |
Deployed seat belt pretensioner(s)
|
- |
Turn the ignition switch ON; the SRS indicator should come on
for about six seconds and then go off.
|
Gear Actuator > Repair procedures
Removal
1.
Remove the following parts first:
A.
Air cleaner assembly and air duct
(Refer to the Intake and Exhaust System of EM Gro ...
Components and Components Location
Components Location
[LHD]
1. Drive shaft
2. Lower arm
3. Front disc
4. Front strut assembly
5. Steering gearbox
6. Stabilizer bar
7. Sub fram ...
Side Impact Sensor (SIS). Components and Components Location
Components
...