Component Replacement After Deployment
Before doing any SRS repairs, use the GDS to check for DTCs. Refer
to the Diagnostic Trouble Code list for repairing of the related DTCs.
|
- |
SRSCM
|
- |
Deployed airbag(s)
|
- |
Seat belt pretensioner(s)
|
- |
Anchor pretensioner(s)
|
- |
Front impact sensor
|
- |
SRS wiring harnesses
|
- |
Inspect the clock spring for heat damage.
If any damage found, replace the clock spring.
|
- |
SRSCM
|
- |
Deployed airbag(s)
|
- |
Side impact sensor(s) for the deployed side(s)
|
- |
SRS wiring harnesses
|
- |
Deployed seat belt pretensioner(s)
|
- |
Deployed anchor pretensioner(s)
|
- |
Turn the ignition switch ON; the SRS indicator should come on
for about six seconds and then go off.
|
Input Speed Sensor 2 > Description and Operation
Description
The input shaft speed sensor is important in that it detects the input
shaft RPM and sends this information to the TCM. It provides important input
information for electric contr ...
Components and Components Location
Component Location
1. Hood switch
2. Burglar horn
3. IPM (BCM) and RF antenna
4. Key warning switch
5. Front door switch
6. Front door lock actuator & sw ...
IPM (Intelligent integrated Platform Module). Specifications
Specifications
Items
Specifications
Rated voltage
DC 12V
Operating voltage
DC 9 ~ 16V
Operating temp ...