Hyundai Veloster: Repair procedures
Hyundai Veloster 2011-2017 Service Manual / Steering System / General Information / Repair procedures
Inspection
| 1. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
| 2. |
Measure the distance the steering wheel can be turned without
moving the front wheels.
|
| 3. |
If the play exceeds standard value, inspect the steering column,
shaft, and linkages.
|
| 1. |
Position the vehicle on a level surface and place the steering
wheel in the straight ahead position.
|
| 2. |
Start the engine and turn the steering wheel from lock to lock
several times to warm up the power steering fluid.
|
| 3. |
Attach a spring scale to the steering wheel. With the engine speed
900 ~ 1100rpm, pull the scale and read it as soon as the tires begin
to turn.
|
| 4. |
If the measured value exceeds standard value, inspect the power
steering gear box and EPS system.
|
Special Service Tools
Special Service Tools
Tool (Number and Name)
Illustration
Use
09561-11001
Steering wheel puller
Remove the steering ...
See also:
Driving in flooded areas
Avoid driving through flooded areas unless you are sure the water is no higher
than the bottom of the wheel hub. Drive through any water slowly. Allow adequate
stopping distance because brake perf ...
Steering Column and Shaft. Repair procedures
Replacement
1.
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
2.
Turn the steering wheel so ...
CVVT (Continuously Variable Valve Timing) System. Description and Operation
Description
Continuous Variable Valve Timing (CVVT) system advances or retards the
valve timing of the intake and exhaust valve in accordance with the ECM control
signal which is calculated ...
Categories
- Hyundai Veloster Manuals Home
- Hyundai Veloster 2010-2017 Owner's Manual
- Hyundai Veloster 2010-2017 Service Manual
