Fuse Inspection
1. |
Be sure there is no play in the fuse holders, and that the fuses
are held securely.
|
2. |
Are the fuse capacities for each circuit correct?
|
3. |
Are there any blown fuses?
If a fuse is to be replaced, be sure to use a new fuse of the
same capacity. Always determine why the fuse blew first and completely
eliminate the problem before installing a new fuse.
|
Removal
1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
|
3. |
Disconnect the connectors from the fuse side of the passenger
compartment junction box (A).
|
4. |
Remove the passenger compartment junction box after loosening
the mounting nuts (2EA) and bolt.
|
5. |
Disconnect the connectors and the cables from the back side of
the passenger compartment junction box.
|
Installation
1. |
Install the connectors and the cables from the back side of the
passenger compartment junction box.
|
2. |
Install the crash pad lower panel.
|
3. |
Check that all system operates normally.
|
Rear Door. Repair procedures
Replacement
Door Trim Replacement
•
Take care not to scratch the door trim and
other par ...
Using the Tire Mobility Kit
1. Shake the sealant bottle. 2. Screw connection hose (9) onto the connector
of the sealant bottle. 3. Ensure that button (8) on the compressor is not pressed.
4. Unscrew the valve cap of the dama ...
Economical operation
Your vehicle's fuel economy depends mainly on your style of driving, where you
drive and when you drive.
Each of these factors affects how many miles (kilometers) you can get from a
gallon (l ...