Description
1. |
Description : It cuts automatically power to be provided with
load for reducing unnecessary dark current according to vehicle state.
|
2. |
SJB had 3 modes, "Normal Mode", "Sleep Mode", "Power Off Mode".
Auto cut of dark current practice in "Sleep Mode".
|
3. |
The explanation - The auto cut of dark current
|
4. |
Problem when fuse switch setting is wrong
: If a fuse switch is set to OFF(Before delivering to customer)
by a customer or technician and auto cut function of dark current activates,
below problems may happen.
*If fuse switch OFF(before delivering to customer) is set, power
of BCM, Digital clock and audio is shut off.
|
Components and Components Location
Component Location
1. DCT (Dual Clutch Transmission)
2. DCT Control Module
3. Shift Lever
4. Data Link Connector (DLC)
...
Passive Occupant Detection System (PODS-F). Repair procedures
Removal
PODS-F ECU
1.
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
2.
Remove the ...
Accelerator Position Sensor (APS). Schematic Diagrams
Circuit Diagram
...