Removal
1. |
Remove the rear wheel and tire.
|
2. |
Remove the rear wheel speed sensor mounting bolt (A).
|
3. |
Remove the rear seat back.
(Refer to the Body group - Seat)
|
4. |
Remove the rear wheel housing trim.
(Refer to the Body group – interior trim)
|
5. |
Disconnect the rear wheel speed sensor connector.
|
6. |
Installation is the reverse of removal.
|
Inspection
1. |
Measure the output voltage between the terminal of the wheel speed
sensor and the body ground.
|
2. |
Compare the change of the output voltage of the wheel speed sensor
to the normal change of the output voltage as shown below.
|
Side repeater light bulb replacement
If the light bulb does not operate, have the vehicle checked by an authorized
HYUNDAI dealer. ...
Fuel Pressure Control Valve. Specifications
Specification
Item
Specification
Coil Resistance (Ω)
0.5 [20°C(68°F)
...
Steering Gear box. Repair procedures
Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...