(1) Stop and tail light
(2) Back-up light
(3) Rear turn signal light
(4)
Tail light
Outside
1. Open the tailgate.
2. Loosen the outside light assembly retaining screws
with a cross-tip screwdriver.
3. Remove the rear combination light assembly from
the body of the vehicle.
4. Remove the socket from the assembly by turning the
socket counterclockwise until the tabs on the socket align with the slots on the
assembly.
5. Remove the bulb from the socket.
6. Insert a new bulb by inserting
it into the socket and pushing or rotating it until it locks into place.
7. Install
the socket in the assembly by aligning the tabs on the socket with the slots in
the assembly. Push the socket into the assembly and turn the socket clockwise.
8. Reinstall the light assembly to the body of the vehicle.
9. Tighten the screws.
Front Seat. Components and
Components Location
Components
1. Headrest
2. Headrest guide
3. Front seat back cover
4. Front seat back heater
5. Front seat back frame
6. Front seat back board
7. Front seat cushio ...
Rear Hub - Carrier. Components and
Components Location
Components
1. Rear torsion beam assembly
2. Rear dust cover
3. Rear wheel hub assembly
4. Rear brake disc
...
Instrument Cluster. Repair procedures
Inspection
Speedometer
1.
Adjust the pressure of the tires to the specified level.
2.
Drive the vehicle onto a speedometer tester. Use whee ...