Hyundai Veloster Manuals

Hyundai Veloster: Rear Coil Spring. Repair procedures - Rear Suspension System - Suspension SystemHyundai Veloster: Rear Coil Spring. Repair procedures

Replacement

1.
Remove the rear wheel & tire.

Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

Be careful not to damage to the hub bolts when removing the rear wheel & tire.
2.
Remove the rear shock absorber (A) from the frame by loosening the nut and then remove the coil spring.

Tightening torque :
98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

3.
Installation is the reverse of removal.

Inspection

1.
Check the coil spring for crack and deformation.
2.
Check the coil spring pad for damage and deformation.

Rear Coil Spring. Components and Components Location
Components 1. Spring upper pad 2. Spring 3. Spring lower pad ...

Rear Torsion Beam Axle. Components and Components Location
Components 1. Rear torsion beam axle ...

See also:

Non-operational conditions of rear parking assist system
The rear parking assist system may not operate properly when: 1. Moisture is frozen to the sensor. (It will operate normally when the moisture has been cleared.) 2. The sensor is covered with forei ...

Engine start/stop button position
OFF • with manual transaxle To turn off the engine, stop the vehicle then press the engine start/stop button with the engine start/stop button ON. • with DCT To turn off the engine, press th ...

All season tires
HYUNDAI specifies all season tires on some models to provide good performance for use all year round, including snowy and icy road conditions. All season tires are identified by ALL SEASON and/or ...

Categories


© 2011-2024 Copyright www.hvmanual.com