Special Tools
Removal Of Parts
Disassembly
1. |
Inspection of parts
Each part, when removed, should be carefully on suspected for
malfunction, deformation, damage, and other problems.
|
2. |
Arrangement of parts
All disassembled parts should be carefully arranged for effective
reassembly.
Be sure to separate and correctly identify the parts to be replaced
from those that will be used again.
|
3. |
Cleaning parts for reuse
All parts to be used again should be carefully and thoroughly
cleaned by an appropriate method.
|
Cruise Control Switch
Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal.
2.
Remove the driver airbag module. (Refer to the RT g ...
Input Speed Sensor 1 > Repair procedures
Inspection
Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor.
Removal
1.
Remove the under cover.
2.
Disconnect the inp ...
Automatic climate control system
1. A/C (Air conditioning) button 2. Air intake control button 3. Rear window
defroster button 4. Mode selection button 5. Temperature control knob 6. Fan
speed control button 7. Auto button 8. O ...