Hyundai Veloster: Power Outside Mirror Switch. Repair procedures
Inspection
| 1. |
Disconnect the power door mirror switch module connector from
front door trim panel.
|
| 2. |
Check for the continuity between terminals of power door mirror
switch according to the table.
[Power Mirror Switch]
|
Removal
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the front door trim panel.
(Refer to the BD group - "Front door")
|
| 3. |
Disconnect the power door mirror switch connector(A) from the
door trim panel.
|
| 4. |
Remove the power door mirror switch(A), after loosening the screw
(3EA).
|
Installation
| 1. |
Install the driver power window switch and connectors.
|
| 2. |
Install the front door trim panel.
|
Power Outside Mirror Switch. Schematic Diagrams
Power Door Mirror Actuator. Repair proceduresTailgate room lamp
The tailgate room lamp comes on when the tailgate is opened.
CAUTION
The tailgate room lamp comes on as long as the tailgate lid opens. To prevent
unnecessary charging system drain, close the ta ...
Components of the Tire Mobility Kit
0. Speed restriction label 1. Sealant bottle and label with speed restriction
2. Filling hose from sealant bottle to wheel 3. Connectors and cable for the power
outlet direct connection 4. Holde ...
Description and Operation
Operation and Leakage Check
Check all of the following items:
Component
Procedure
Brake Booster (A)
Check brake operation by applyin ...