Inspection
1. |
It will be able to diagnose defects of power door lock with GDS
quickly. GDS can operates actuator forcefully, input/output value monitoring
and self diagnosis.
|
2. |
Select model and "BCM".
|
3. |
Select the "SJB" to check.
|
4. |
Select "Current data", if you will check current data of power
door lock system. It provides input/output status of SJB.
|
5. |
To check the power door lock operation manually, select "Actuation
test".
|
Removal
1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the front door trim.
(Refer to the BD group - "Front door")
|
3. |
Remove the grip holder cover, after loosening the screw (4EA).
|
4. |
Remove the grip holder cover bracket.
|
5. |
Remover the power window switch (A), after loosening the bolts
(4EA).
|
Installation
1. |
Install the power window switch.
|
2. |
Install the grip holder cover.
|
3. |
Connect the connector and install the front door trim panel.
|
Fuel Filter. Repair procedures
Replacement
1.
Remove the fuel pump (Refer to “Fuel Pump” in this group).
2.
Disconnect the electric pump wiring connector (A) and the fuel ...
Troubleshooting
Troubleshooting
1.
The lamp switch inputs can be checked using the GDS.
2.
To check the input value of lamp switch, select option "IPM&quo ...
Opening the trunk with the alarm armed (if equipped)
When the alarm is armed, the alarm will not sound if the trunk lid is opened
with the transmitter (or smart key).
Once the trunk is opened and then closed, the trunk will be locked automatically
...