Hyundai Veloster Manuals

Hyundai Veloster: Positive Crankcase Ventilation (PCV) Valve. Repair procedures - Crankcase Emission Control System - Emission Control SystemHyundai Veloster: Positive Crankcase Ventilation (PCV) Valve. Repair procedures

Hyundai Veloster 2011-2017 Service Manual / Emission Control System / Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve. Repair procedures

Removal

1.
Disconnect the vapor hose (A).
2.
Remove the PCV valve (B).


Inspection

1.
Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement.

If the plunger does not move (PCV valve is clogged), clean or replace the valve.

Installation

1.
Installation is reverse of removal.

PCV Valve installation:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)


Positive Crankcase Ventilation (PCV) Valve. Description and Operation
Operation Principle ...

Evaporative Emission Control System
...

See also:

Components and Components Location
Components 1. HECU module 2. Front wheel speed sensor 3. Rear wheel speed sensor 4. Yaw rate & G sensor 5. Steering angle sensor 6. ABS Warning lamp 7 ...

Rear Seat. Repair procedures
Replacement Rear Seat Assembly Replacement 1. After loosening the mounting bolts, then remove the rear seat cushion (A). Tightening torque ...

Passenger Airbag (PAB) Module. Components and Components Location
Components ...

Categories


В© 2011-2024 Copyright www.hvmanual.com