Removal
1. |
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
|
2. |
Remove the glove box housing.
(Refer to the Body group - "Crash pad")
|
3. |
Disconnect the passenger airbag connector (A) and remove the PAB
mounting bolt (B).
|
4. |
Remove the crash pad.
(Refer to the Body group - "Crash pad")
|
5. |
Remove the mounting bolts from the crash pad. Then remove the
passenger airbag.
|
Installation
1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable from battery and wait for
at least three minutes before beginning work.
|
3. |
Place a passenger airbag on the crash pad and tighten the passenger
airbag mounting bolts.
|
4. |
Install the crash pad.
(Refer to the Body group - "Crash pad")
|
5. |
Tighten the passenger airbag mounting bolts.
|
6. |
Connect the passenger airbag harness connector to the SRS main
harness connector.
|
7. |
Reinstall the glove box housing.
(Refer to the Body group - "Crash pad")
|
8. |
Reconnect the battery negative cable.
|
9. |
After installing the passenger airbag (PAB), confirm proper system
operation:
|
Seat belt precautions
WARNING
All occupants of the vehicle must wear their seat belts at all times. Seat
belts and child restraints reduce the risk of serious or fatal injuries for all
occupants in the event of a coll ...
Interior light bulb replacement
1. Using a flat-blade screwdriver, gently pry the lens from the interior light
housing. 2. Remove the bulb by pulling it straight out.
WARNING
Prior to working on the Interior Lights, ensure t ...
Control Panel
1. Disc slot
2. Eject () Press to eject a disc
from the unit.
3. RESET hole You can reset the unit when it doesn't operate normally. Press
the RESET hole with a sharp object.
4. FM/AM Sel ...