Inspection
1. |
Remove the overhead console lamp (map lamp) assembly then check
for continuity between terminals. If the continuity is not as specified,
replace the map lamp switch.
[Overhead console]
[Map lamp]
|
Removal
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Loosen 2 screws holding the overhead console (A).
Remove the overhead console (A) after loosening 2 screws.
|
3. |
Disconnect the connectors (A) of sunroof switch and lamp switch
then remove the overhead console lamp assembly.
|
4. |
If necessary to replace the bulb, replace the bulb after removing
the overhead console lens (A).
|
Installation
1. |
Install the overhead console lamp.
|
2. |
Connect the sunroof switch connector and lamp connector.
|
3. |
Install the overhead console assembly.
|
Parking brake
Checking the parking brake
Check the stroke of the parking brake by counting the number of “clicks’’ heard
while fully applying it from the released position. Also, the parking brake alone ...
Driver's and passenger's front air bag
Your vehicle is equipped with an Advanced Supplemental Restraint (Air Bag) System
and lap/shoulder belts at both the driver and passenger seating positions.
The indications of the system's pr ...
Starter Relay
Repair procedures
Inspection
1.
Remove the fuse box cover.
2.
Remove the starter relay (A).
3.
...