Hyundai Veloster: Meaning Of Symbols

There are five primary symbols used to complement illustrations. These symbols indicate the part to apply such materials during service.

Tightening Torque Table Of Standard Parts

Bolt nominal diameter (mm) Pitch (mm) Torque Nm (kg.cm, lb.ft) Head Mark 4 Head Mark 7 ...

General Service Information

Protection Of The Vehicle Always be sure to cover fenders, seats, and floor areas before starting work. The support rod m ...

See also:

If the engine will not start
If engine doesn't turn over or turns over slowly 1. If your vehicle has an automatic transaxle, be sure the shift lever is in N (Neutral) or P (Park) and the emergency brake is set. 2. Check th ...

Rear Torsion Beam Axle. Components and Components Location
Components 1. Rear torsion beam axle ...

Shelf disassembly and installment
1. Disassemble the wires(1) connected to left and right fixed hook. 2. Push the shelf(2) up and disassemble the shelf. 3. To install the shelf, push the shelf down at original position and fix t ...