1. Turn the ignition switch to the ON position.
2. Select the defrost button
().
3. Press the air intake control
button at least 5 times within 3 seconds.
The indicator on the air intake button blinks 3 times with 0.5 seconds of interval. It indicates that the defogging logic is canceled or returned to the programmed status.
If the battery has been discharged or disconnected, it resets to the defog logic status.
Smart key unit. Repair procedures
Inspection
Smart Key Unit
-
Refer to the BE group - inspection / self diagnosis with GDS.
Smart Key Switch
-
Refer to the BE group - inspecti ...
Gear Actuator > Components and Components Location
Component Location
1. Gear actuator
2. DCT(Dual Clutch Transmission)
...
Closing the trunk
To close the trunk, lower the trunk lid, then press down on it until it locks.
To be sure the trunk lid is securely fastened, always check by trying to pull it
up again.
WARNING
The trunk lid sh ...