To defog inside windshield
1. Select any fan speed except “0” position.
2. Select desired temperature.
3. Select the or
position.
4. The outside (fresh)
air will be selected automatically. Additionally, the air conditioning will automatically
operate if the mode is selected to the
position.
If the air conditioning and outside (fresh) air position are not selected automatically, press the corresponding button manually.
To defrost outside windshield
1. Set the fan speed to the highest (extreme right) position.
2. Set the temperature
to the extreme hot position.
3. Select the
position.
4. The outside (fresh)
air and air conditioning will be selected automatically.
If the air-conditioning, outside (fresh) air position and higher fan speed are not selected automatically, adjust the corresponding button or knob manually.
Heated Oxygen Sensor (HO2S). Schematic Diagrams
Circuit Diagram
...
Description and Operation
Operation and Leakage Check
Check all of the following items:
Component
Procedure
Brake Booster (A)
Check brake operation by applyin ...
Clutch Pedal. Repair procedures
Inspection
Clutch Pedal Inspection
1.
Measure the clutch pedal height (from the face of the pedal pad
to the floor board) and the clutch pedal clevis pin pla ...