Hyundai Veloster: License plate light bulb replacement
Hyundai Veloster 2011-2017 Owner's Manual / Maintenance / Light bulbs / License plate light bulb replacement
1. Open the tailgate.
2. Remove the tailgate trim by removing the plastic mounting
clips.
CAUTION
Be careful when removing the plastic mounting clips in cold weather, it may crack.
3. Remove the lens by pushing the cover.
4. Remove the bulb by pulling it straight
out.
5. Install a new bulb.
6. Reinstall the lens securely.
High mounted stop light replacement
If the light does not operate, have the vehicle checked by an authorized HYUNDAI
dealer.
3. Loosen the assembly retaining nuts. 4. Remove the rear combination light
assembly from the body of th ...
Interior light bulb replacement
1. Using a flat-blade screwdriver, gently pry the lens from the interior light
housing. 2. Remove the bulb by pulling it straight out.
WARNING
Prior to working on the Interior Lights, ensure t ...
See also:
Fender. Repair procedures
Replacement
•
When removing and installing the fender,
an assistant is necessary.
...
Heating and air conditioning
1. Start the engine. 2. Set the mode to the desired position. To improve the
effectiveness of heating and cooling : - Heating:
- Cooling: 3. Set the temperature
control to the desired position. ...
Rear Body. Body Repair
Roof panel rear corner
Tail gate hinge mounting hole (Ø12)
Side outer panel rear corner
...
Categories
- Hyundai Veloster Manuals Home
- Hyundai Veloster 2010-2017 Owner's Manual
- Hyundai Veloster 2010-2017 Service Manual
