Hyundai Veloster Manuals

Hyundai Veloster: License Lamp. Repair procedures - Lighting System - Body Electrical SystemHyundai Veloster: License Lamp. Repair procedures

Removal

1.
Disconnect the negative(-) battery terminal.
2.
Replace the bulb after turning the socket (A).


Installation

1.
Install the bulb.
2.
Install the lens and license lamp.

Overhead Console Lamp. Repair procedures
Inspection 1. Remove the overhead console lamp (map lamp) assembly then check for continuity between terminals. If the continuity is not as specified, replace the map ...

Hazard Lamp Switch. Repair procedures
Inspection 1. The GDS will be able to diagnose defects of hazard switch quickly. The GDS can operates actuator manually, input/output value monitoring and self diagno ...

See also:

Remote keyless entry system operations
Lock (1) All doors are locked if the lock button is pressed. If all doors, trunk and hood are closed, the hazard warning lights will blink once to indicate that all doors are locked. Also, if ...

Engine Control Module (ECM). Schematic Diagrams
Harness Connector ECM Terminal Function Connector [EGGM-A] Pin No. Description Connected to 1 Injector (Cylinder #3) ...

Changing a tire with TPMS
If you have a flat tire, the Low Tire Pressure will come on. Have the flat tire repaired by an authorized HYUNDAI dealer as soon as possible or replace the flat tire with the spare tire. CAUTION ...

Categories

В© 2011-2026 Copyright www.hvmanual.com