Hyundai Veloster: IPM (Intelligent integrated Platform Module). Repair procedures

Hyundai Veloster 2011-2017 Service Manual / Body Electrical System / BCM (Body Control Module) / IPM (Intelligent integrated Platform Module). Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the crash pad lower panel. (Refer to the BD group - "Crash pad")

3.	Disconnect the IPM connectors, loosening the nut (2EA) and the bolt (1EA), then remove the IPM.

4.	The installation is the reverse order of removal.

IPM Diagnosis with GDS

1.	It will be able to diagnose defects of IPM with GDS quickly. GDS can operates actuator manually, input/output value monitoring and self diagnosis.

2.	Select model and "IPM".

3.	Select the module to check.

4.	Select "Input/output monitoring", if you will check current data of body network system. It provides input/output status of each module.

5.	If you will check each module data operation manually, select "Actuation test".

6.	To check the DTC of the each module, select "DIAGNOSTIC TROUBLE CODES".

7.	If you want to change user option, select “user option”.

IPM (Intelligent integrated Platform Module). Description and Operation

Description IPM Overview The Body Control Module (IPM-Intelligent integrated Platform Module) supplies vehicle occupants with visual and audible information and it controls various vehic ...

Seat Electrical

...

See also:

Accelerator Position Sensor (APS). Description and Operation
Description Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important senso ...

Airbag Module Disposal. Description and Operation
Airbag Disposal Special tool required Deployment tool 0957A-34100A Before scrapping any airbags or side airbags (including those in a whole vehicle to be scrapped), the airbag ...

Camshaft Position Sensor (CMPS). Schematic Diagrams
Circuit Diagram ...

Categories

© 2011-2024 Copyright www.hvmanual.com