Inspection
1. |
Turn the ignition switch OFF.
|
2. |
Disconnect the IATS connector.
|
3. |
Measure resistance between the IATS terminals 3 and 4.
|
4. |
Check that the resistance is within the specification.
|
Camshaft Position Sensor (CMPS). Schematic Diagrams
Circuit Diagram
...
Checking tire inflation pressure
Check your tires once a month or more.
Also, check the tire pressure of the spare tire.
How to check
Use a good quality gage to check tire pressure.You can not tell if your tires
are properly inf ...
Rear Door. Components and Components
Location
Components
1. Rear door trim
2. Rear door delta inner cover
3. Rear door inside handle cap
4. Rear door trim seal
5. Rear door panel assembly
6. Rear door be ...