1. Turn the ignition switch and all other switches off.
2. Open the fuse panel
cover.
3. Pull the suspected fuse straight out. Use the removal tool provided in the
engine compartment fuse panel.
4. Check the removed fuse; replace it if it is
blown.
5. Push in a new fuse of the same rating, and make sure it fits tightly
in the clips. If it fits loosely, consult an authorized HYUNDAI dealer.
If you do not have a spare, use a fuse of the same rating from a circuit you may not need for operating the vehicle, such as the cigarette lighter fuse.
If the headlights or other electrical components do not work and the fuses are OK, check the fuse panel in the engine compartment. If a fuse is blown, it must be replaced.
Mode switch
Always, put the mode switch at the ON position.
If you move the switch to the OFF position, some items must be reset and transmitter (or smart key) may not work properly.
CAUTION
Do not operate the mode switch.
Multimedia Jack. Repair procedures
Removal
1.
Remove the floor console assembly.
(Refer to the BD group - "Console")
2.
Remove the multimedia jack assembly (A). ...
Components and Components Location
Components(1)
Connector name
No
Descripton
Connector name
No
RH SIDE
Lighting
(13 pin)
-LH side
...
Seat Belt Pretensioner (BPT). Components and Components Location
Components
...