Hyundai Veloster: Input Speed Sensor 2 > Description and Operation

The input shaft speed sensor is important in that it detects the input shaft RPM and sends this information to the TCM. It provides important input information for electric control.

The information is needed in all operations, including feedback control, gear shift control and failure detection of other sensors.

Input Speed Sensor 1 > Repair procedures

Inspection Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor. Removal 1. Remove the under cover. 2. Disconnect the inp ...

Input Speed Sensor 2 > Repair procedures

Inspection Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor. Removal 1. Remove the under cover. 2. Disconnect the inp ...

See also:

Clutch Release Cylinder. Components and Components Location
Components 1. Union bolt 2. Gasket 3. Tube joint 4. Clutch tube 5. Valve plate 6. Valve spring 7. Bleeder screw 8. Release cylinder 9. Return sprin ...

Brake/clutch fluid
Checking the brake/clutch fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the r ...

Specifications
Specification Engine TM Joint type Max. permissible angle Outer Inner Outer Inner Ga ...