Hyundai Veloster Manuals

Hyundai Veloster: Input Speed Sensor 1 > Repair procedures - Dual Clutch Transmission Control System - Dual Clutch Transmission(DCT) SystemHyundai Veloster: Input Speed Sensor 1 > Repair procedures

Inspection

Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor.

Removal

1.
Remove the under cover.
2.
Disconnect the input shaft speed sensor connector (A).

3.
Loosen the mounting bolt and then remove the input shaft speed sensor (B).


Installation

1.
Installation is the reverse of removal.

Tightening torque : 1.0 ~ 1.2 kgf.m


Input Speed Sensor 1 > Description and Operation
Description The input shaft speed sensor is important in that it detects the input shaft RPM and sends this information to the TCM. It provides important input information for electric contr ...

Input Speed Sensor 2 > Description and Operation
Description The input shaft speed sensor is important in that it detects the input shaft RPM and sends this information to the TCM. It provides important input information for electric contr ...

See also:

Passive Occupant Detection System (PODS-F). Components and Components Location
Components ...

Accelerator Pedal. Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor conn ...

Trailer towing
We do not recommend using this vehicle for trailer towing. ...

Categories


В© 2011-2024 Copyright www.hvmanual.com