Hyundai Veloster Manuals

Hyundai Veloster: Input Speed Sensor 1 > Description and Operation - Dual Clutch Transmission Control System - Dual Clutch Transmission(DCT) SystemHyundai Veloster: Input Speed Sensor 1 > Description and Operation

Description

The input shaft speed sensor is important in that it detects the input shaft RPM and sends this information to the TCM. It provides important input information for electric control.
The information is needed in all operations, including feedback control, gear shift control and failure detection of other sensors.


Gear Actuator Motor > Repair procedures
Inspection 1. Turn off the ignition switch. 2. Disconnect the gear actuator motor connector. 3. Measure the ...

Input Speed Sensor 1 > Repair procedures
Inspection Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor. Removal 1. Remove the under cover. 2. Disconnect the inp ...

See also:

Engine Coolant Temperature Sensor (ECTS). Description and Operation
Description Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant passage of the cylinder head for detecting the engine coolant temperature. The ECTS uses a thermistor th ...

Tailgate Glass. Components and Components Location
Components 1. Tail gate glass ...

Brake/clutch fluid
Checking the brake/clutch fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the r ...

Categories


В© 2011-2024 Copyright www.hvmanual.com