Hyundai Veloster: High mounted stop light replacement
Hyundai Veloster 2011-2017 Owner's Manual / Maintenance / Light bulbs / High mounted stop light replacement
If the light does not operate, have the vehicle checked by an authorized HYUNDAI dealer.
3. Loosen the assembly retaining nuts.
4. Remove the rear combination light
assembly from the body of the vehicle.
Rear combination light bulb replacement
(1) Stop and tail light (2) Back-up light (3) Rear turn signal light (4)
Tail light
Outside
1. Open the tailgate. 2. Loosen the outside light assembly retaining screws
with a cross-tip screw ...
License plate light bulb replacement
1. Open the tailgate. 2. Remove the tailgate trim by removing the plastic mounting
clips.
CAUTION
Be careful when removing the plastic mounting clips in cold weather, it
may crack.
3. Remove ...
See also:
Front Disc Brake. Components and Components Location
Components
1. Guide rod bolt
2. Bleed screw
3. Caliper body
4. Caliper carrier
5. Inner pad shim
6. Brake pad
7. Pad retainer
...
Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for
the first 600 miles (1,000 km) you may add to the performance, economy and life
of your vehicle.
Do not race the ...
Clutch Actuator Motor 2 (Even Gear) > Description and Operation
Description
The clutch actuator motor is mounted on the DCT.
The clutch actuator motor comprises an actuator motor that controls the
odd clutch and an actuator motor that controls the even ...
Categories
- Hyundai Veloster Manuals Home
- Hyundai Veloster 2010-2017 Owner's Manual
- Hyundai Veloster 2010-2017 Service Manual
