Hyundai Veloster: High Mounted stop lamp. Repair procedures
Hyundai Veloster 2011-2017 Service Manual / Body Electrical System / Lighting System / High Mounted stop lamp. Repair procedures
Hyundai Veloster 2011-2017 Service Manual / Body Electrical System / Lighting System / High Mounted stop lamp. Repair procedures
Removal
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the tailgate center trim.
(Refer to the BD group - "Exterior - Tailgate")
|
| 3. |
Loosen 4 nuts and remove the rear garnish assembly after disconnecting
the connector.
|
| 4. |
Loosen 5 screws and remove the garnish cover (A).
|
| 5. |
Loosen 4 screws and remove the high mounted stop lamp (A).
|
Installation
| 1. |
Install the high mounted stop lamp.
|
| 2. |
Install the rear garnish and the tailgate trim.
|
Fog Lamps. Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the lighting switch of the multifunction switch.
(Refer to the &q ...
Rear combination lamp. Repair procedures
Removal
Rear Combination lamp
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the connector (B) after loosening 2 screws, an ...
See also:
Driver Airbag (DAB) Module and Clock Spring. Components and Components Location
Components
1. Driver Airbag (DAB)
2. Steering Wheel
3. Clock Spring
...
Engine start/stop button position
OFF
• with manual transaxle
To turn off the engine, stop the vehicle then press the engine start/stop button
with the engine start/stop button ON.
• with DCT
To turn off the engine, press th ...
SRS components and functions
The SRS consists of the following components:
1. Driver's front air bag module 2. Passenger's front air bag module 3. Side
impact air bag modules 4. Curtain air bag modules 5. Retractor p ...
Categories
- Hyundai Veloster Manuals Home
- Hyundai Veloster 2010-2017 Owner's Manual
- Hyundai Veloster 2010-2017 Service Manual
© 2011-2024 Copyright www.hvmanual.com