Inspection
1. |
Turn off the ignition switch.
|
2. |
Disconnect the gear actuator motor connector.
|
3. |
Measure the resistance on the gear actuator motor terminal.
|
4. |
Refer to the specifications and check that the measured resistance
is as specified.
|
Removal
1. |
Remove the gear actuator assembly.
(Refer to "Gear actuator" in this group)
|
Front Door. Repair procedures
Replacement
Front Door Trim Replacement
•
Take care not to scratch the door trim and
oth ...
Daytime running light
Daytime Running Lights (DRL) can make it easier for others to see the front of
your vehicle during the day. DRL can be helpful in many different driving conditions,
and it is especially helpful af ...
Under Body. Body Repair
Projected Dimensions
Front side member tooling hole (Ø6.6)
Front side member tooling hole (Ø6.6)
...