Inspection
1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Disconnect the fuel pressure regulator valve connector.
|
3. |
Measure resistance between the fuel pressure regulator valve terminals
1 and 2.
|
4. |
Check that the resistance is within the specification.
|
Armed stage
Using the smart key (if equipped)
Park the vehicle and stop the engine. Arm the system as described below.
1.Turn off the engine.
2.Make sure that all doors, the engine hood and trunk lid are close ...
Side Impact Sensor (SIS). Components and Components Location
Components
...
Special Service Tools
Special Service Tools
Tool(Number and Name)
Illustration
Use
09495-3K000
Band installer
Installation of ear type bo ...