Hyundai Veloster Manuals

Hyundai Veloster: Fuel Filler Cap. Description and Operation - Evaporative Emission Control System - Emission Control SystemHyundai Veloster: Fuel Filler Cap. Description and Operation

Description

A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap and the filler neck flange contact each other, the ratchet produces a loud clicking noise indicating the seal has been set.


Canister. Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. ...

Fuel Tank Air Filter. Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. ...

See also:

Heated Oxygen Sensor (HO2S). Specifications
Specification HO2S [Bank 1/Sensor 1] Item Specification Heater Resistance (Ω) 2.4 ~ 4.0 [20°C(68°F)] HO2S [Bank 1/Sensor 2 ...

Panoramaroof. Repair procedures
Replacements Movable glass Replacement 1. Open the movable glass fully. 2. After loosening the mounting screws, then remove the movabl ...

Seat Heater. Repair procedures
Inspection First Seat Heater 1. Check for continuity and measure the resistance between terminals. [Cushion] No. ...

Categories


© 2011-2025 Copyright www.hvmanual.com