Replacement
1. |
Remove the front wheel & tire.
|
2. |
Remove the wheel speed sensor bracket(B) and wheel speed sensor
(A).
|
3. |
Disconnect the stabilizer link (B) with the front strut assembly
(A) after loosening the nut.
|
4. |
Loosen the strut mounting nut.
|
5. |
Disconnect the front strut assembly (A) with the front axle by
loosening the bolt & nut.
|
6. |
Installation is the reverse of removal.
|
Disassembly and Reassembly
1. |
Compress the coil spring (A) using SST(09546-26000). Do not compress
the spring more than necessary.
|
2. |
Loosen the lock nut (C) from the strut assembly (B).
|
3. |
Disassemble the components of front strut assembly in sequence.
(Refer to Front strut assembly components)
|
4. |
Reassembly is the reverse of disassembly.
|
Inspection
1. |
Check the components for damage or deformation.
|
2. |
Compress and extend the piston rod (A) and check that there is
no abnormal resistance or unusual sound during operation.
|
Tilting the sunroof
Before opening or closing the sunroof, open the sunshade.
To open the sunroof, push the sunroof control lever upward.
To close the sunroof, push the sunroof control lever forward until the sunroof ...
Battery saver function
The purpose of this feature is to prevent the battery from being discharged.
The system automatically turns off the parking lights when the driver removes
the ignition key (smart key : turns ...
Telemetics Unit (TMU). Components and Components Location
Component
...