Removal
|
1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
2. |
Remove the front wheel guard.
|
3. |
Remove the washer reservoir.
(Refer to the Body Electrical group - "Washer motor")
[Right side only]
|
4. |
Remove the front impact sensor mounting bolt (B).
|
5. |
Disconnect the front impact sensor connector (A).
|
6. |
Remove the front impact sensor.
|
Installation
|
1. |
Install the new front impact sensor.
|
2. |
Tighten the front impact sensor mounting bolt.
|
3. |
Connect the front impact sensor connector.
|
4. |
Install the washer reservoir.
(Refer to the Body Electrical group - "Washer motor")
[Right side only]
|
5. |
Install the front wheel guard.
|
6. |
Reconnect the battery negative cable.
|
7. |
After installing the Front Impact Sensor, confirm proper system
operation:
|
Camshaft Position Sensor (CMPS). Description and Operation
Description
Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft
position by using a hall element.
It is related with Crankshaft Position Sensor (CKPS) and detects the ...
Resetting the sunroof
Whenever the vehicle battery is disconnected or discharged, you must reset your
sunroof system as follows:
1. Turn the ignition switch to the ON position. 2. Close the sunroof. 3.
Release the sun ...
Specifications
Specification
Item
Description
Power source
3V
Operating temperature
-20°C ~ +60°C
RF Modulation
...