Hyundai Veloster Manuals

Hyundai Veloster: Front Body. Body Repair - Body Dimensions - Body (Interior and Exterior)Hyundai Veloster: Front Body. Body Repair

Front Body A

Hood hinge mounting hole (Ø10)

Fender apron upper member corner

Front shock absorber housing cover tooling hole (Ø6.6)

Cowl top cover mounting hole (Ø7)

Side outer panel front corner

Front pillar outer panel corner


Front Body B

Hood hinge mounting hole (Ø10)

Fender apron upper member corner

Cowl top cover mounting hole (Ø7)

Engine mounting bracket hole (Ø12)

Transaxle mounting hole (Ø12)

Engine mounting bracket hole (Ø15)

Transaxle mounting hole (Ø15.5)

Front side member tooling hole (Ø9)

Front side member tooling hole (Ø6.6)


Front end module mounting hole
(Ø11.5)
Front end module mounting hole
(Ø11.5)


Front Body C

Engine mounting bracket hole (Ø12)

Transaxle mounting hole (Ø12)

Engine mounting bracket hole (Ø15)

Transaxle mounting hole (Ø15.5)

Front side member tooling hole (Ø9)

Front side member tooling hole (Ø6.6)



General Information
General 1. Basically, all measurements in this manual are taken with a tracking gauge. 2. When a measuring tape is used, check to be sure ...

Side Body. Body Repair
Side Body A (LH) Front side member tooling hole (Ø12) Fender apron upper member tooling hole (Ø ...

See also:

Back-up Lamp Switch. Repair procedures
Inspection 1. Disconnect the back up lamp switch connector (A). 2. Check the continuity between no. 1 and 2 terminals of backup la ...

Interior light bulb replacement
1. Using a flat-blade screwdriver, gently pry the lens from the interior light housing. 2. Remove the bulb by pulling it straight out. WARNING Prior to working on the Interior Lights, ensure t ...

Theft-alarm system
This system is designed to provide protection from unauthorized entry into the vehicle. This system is operated in three stages: the first is the "Armed" stage, the second is the " ...

Categories


В© 2011-2024 Copyright www.hvmanual.com